At present, PEX250x1200 jaw crusher
The working principle of the crusher is: the motor drives the belt and pulley to make the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate. At the same time, the material is crushed or milled and rubbed to achieve the purpose of crushing; when the moving jaw goes down, the angle between the elbow plate and the moving jaw becomes smaller, and the moving jaw plate is under the action of the pull rod and spring When the lower jaw leaves the fixed jaw plate, the crushed material is discharged from the lower opening of the crushing chamber. With the continuous rotation of the motor, the jaw of the crusher periodically crushes and discharges the material to realize mass production.
At present, there are 14 models of PE Series jaw crushers in our factory, with the minimum output of 5 tons per hour and the maximum output of 800 tons per hour, basically meeting the needs of every customer for jaw crushers. If you need to consult and order jaw crusher, please contact us, also welcome to visit our factory, looking forward to win-win cooperation with you.